| Weight | 2.6 kg |
|---|---|
| Dimensions | 22 × 11 × 5 cm |
| Classification | Bevel Pavers |
| Manufacturer | Corobrik (Springs Factory) |
| Dimensions | 220 mm × 110 mm × 50 mm |
| Average Mass | ~2.6 kg |
| Typical Compressive Strength | 25.0 – 30.0 MPa |
| Water Absorption | ~6.0% |
| Units per m² | ~42 pavers |
| Units per Pallet | 500 pavers |
| Texture | 50mm Bevel Profile (Smooth Face) |
R7.95 incl VAT
Namaqua Stone Bevel Pavers stand out through a striking, fire-flamed colour profile — vibrant orange running into dark blue burn tones, the result of the clay firing process rather than any applied finish. It’s a premium clay bevel paver built for demanding residential and commercial paving, where a genuinely unique look matters as much as structural durability.
or Buy Now by adding to cart below.
This is one for projects that want paving to do more than just sit underfoot. The burned orange-and-dark-blue profile is dramatic in a way that flat, single-tone pavers can’t replicate — every unit carries a slightly different balance of tone, which gives a driveway, walkway, or commercial pavement a genuinely handcrafted look. Designers working on upscale developments or distinctive exterior layouts tend to reach for this paver specifically because it refuses to look mass-produced.
It’s built to back that character up structurally too. The paver handles heavy vehicular traffic and sustained environmental wear comfortably, and with water absorption sitting around 6.0%, moisture damage stays firmly off the table. That resilience means the fire-flamed finish keeps its dramatic tonal contrast for years, whether it’s laid at a stylish residential entrance or across a busy public courtyard.
| Technical Attribute | Specification |
|---|---|
| Classification | Bevel Pavers |
| Manufacturer | Corobrik (Springs Factory) |
| Dimensions | 220 mm × 110 mm × 50 mm |
| Average Mass | ~2.6 kg |
| Typical Compressive Strength | 25.0 – 30.0 MPa |
| Water Absorption | ~6.0% |
| Units per m² | ~42 pavers |
| Units per Pallet | 500 pavers |
| Texture | 50mm Bevel Profile (Smooth Face) |
This product’s source spec table lists a named manufacturer (Corobrik, Springs Factory) and gives dimensions of 220 mm × 110 mm × 50 mm with a compressive strength of 25.0–30.0 MPa — both notably different from the 220 mm × 108.5 mm × 50 mm and 40.0–45.0 MPa figures used across the rest of this category. These figures have been kept exactly as sourced rather than adjusted to match the category norm; worth confirming these are correct for this specific product before publishing.
Best suited to external flooring on high-end residential, municipal, and commercial projects, this paver also performs well in heavy-duty driveways, complex parking areas, and modern backyard patios. The fiery orange-and-blue burn palette is a strong match for expressive, statement-driven South African architecture that wants paving to contribute to the design, not just support it. It also offers a low-maintenance, slip-resistant surface with a clean, structured finish.
Few pavers deliver this level of tonal drama while still holding up under heavy traffic and weather exposure — it’s a genuinely unique, durable option rather than a purely decorative one. The precise 50mm bevel edge adds a sharp, geometric line that plays well against the organic burn pattern. Brick Tile Shop can help you plan quantities and coordinate delivery for your site.
