R3.52 incl VAT
Pearl Clinker is a clay building brick supplied as NFX — Non-Facing Extra — for masonry where durability is a key consideration. The supplied laboratory report records an average compressive strength of 32.1 MPa across 12 tested clinker-brick samples.
Brick Tile Shop supplies retailers, builders, contractors and the public wholesale, direct from a factory approximately 30 km outside Port Elizabeth/Gqeberha. Request a quotation with your required quantity and delivery location.
Average Strength: 32.1 (Mpa)
Buy Pearl Clinker bricks through Brick Tile Shop for projects specifying NFX clay masonry. Commonly called Pearl Clinker by customers, this product is supplied for building work where durability takes priority over a uniform decorative appearance.
We supply retailers, builders, contractors and homeowners wholesale, direct from a factory approximately 30 km outside Port Elizabeth/Gqeberha in the Addo Road–Coega Valley area. Our team handles quotations, orders and delivery arrangements.
NFX stands for Non-Facing Extra. This classification describes clay bricks intended for general building work, plastered or unplastered, where durability is the main selection requirement.
NFX bricks may be specified for damp conditions or masonry below damp-proof course, subject to the individual product meeting the project’s requirements. Confirm the required strength, exposure suitability and construction details with your builder or engineer.
The supplied Geoscience Testing Laboratory report, job card C32913, records the following results for 12 clinker-brick samples:
| Test detail | Reported result |
|---|---|
| Test | Burnt clay masonry units — compressive strength |
| Referenced standard | SANS 227:2007, Edition 4.4 |
| Number of samples | 12 |
| Average compressive strength | 32.1 MPa |
| Lowest individual result | 28.4 MPa |
| Highest individual result | 35.1 MPa |
These results apply to the samples received and tested by the laboratory. They are not a guaranteed minimum strength for every delivery, and the compression report alone does not establish water absorption, exposure suitability or full product certification.
Ask Brick Tile Shop to confirm the applicable specifications for your order.
The tested samples measured:
These are measurements of the tested samples, rather than a fixed nominal specification for current supply. Confirm current dimensions and weight when planning quantities, matching existing brickwork or arranging transport.
Consider Pearl Clinker when your project calls for NFX clay bricks. Assess the product against the required masonry strength, wall design and site conditions.
For exposed brickwork, view samples to assess the colour and finish. NFX classification does not promise the appearance or dimensional uniformity associated with decorative face-brick classifications.
If a controlled decorative finish is your priority, compare our face brick range.
Use our brick calculator as a starting point for wall quantities. It uses 55 bricks per m² for a single wall or 110 bricks per m² for a double wall, with 5% wastage included.
These are general estimating rates. The sample dimensions in the clinker report vary, so confirm the coverage of the current product before ordering.
For example, if your builder confirms a rate of 55 bricks per m², a 20 m² wall requires approximately 1,100 bricks before wastage, or 1,155 with a 5% allowance.
Deduct relevant door and window openings and allow separately for piers, returns and other details. Avoid adding the calculator’s 5% allowance twice.
Request a delivery quotation for Port Elizabeth/Gqeberha, Coega, Motherwell, Bluewater Bay and the wider Nelson Mandela Bay area.
For Kariega/Uitenhage, Despatch, Addo or other Eastern Cape destinations, provide your delivery address so Brick Tile Shop can confirm supply options and transport costs.
We supply retail businesses and the public. Confirm pack quantities, available loads, truck access and offloading requirements when requesting your quotation. Arrange any factory collection through Brick Tile Shop before dispatching a vehicle.
Pearl Clinker is the customer-used name for this clinker clay brick, supplied as NFX for masonry where durability is a key selection consideration.
The supplied report records an average compressive strength of 32.1 MPa across 12 samples. Individual results range from 28.4 to 35.1 MPa. These figures describe the tested samples.
A laboratory test referencing SANS 227 is not the same as SABS product certification. The supplied report provides evidence of the recorded compression results.
NFX bricks may be specified for below-ground or damp conditions, but foundation suitability depends on the product’s full specifications and the building design. Obtain confirmation for your application before ordering; the compression result alone is insufficient.
Contact Brick Tile Shop with your quantity and delivery address. Request a quotation showing product costs, VAT and delivery charges, together with availability and transport arrangements.
Call 087 357 2734, WhatsApp 071 363 4547, or email sales@bricktileshop.co.za.
Ask for Pearl Clinker NFX bricks and send your required quantity, delivery suburb or postcode, preferred delivery date and any site-access restrictions.
Explore our Port Elizabeth clay brick range to compare other locally supplied products.
